PLASTIC PVC SPACERS

Seal for tubular spacer against non-pressurized water.

Aquafix 22 for tubes 22 mm / 26 mm

packaging: 1000 pcs

A spacer body 110 mm long and 15 mm wide for fixing three rods to the beam of a ceramic ceiling composite system - available only at us.

Balkenfix 12, length 110 mm, for diameter 6-16 mm

packaging: 1000 pcs

Concrete body with glass fiber for high quality reinforced concrete. Uses for vertical and horizontal reinforcement, great compressive strength. Non-walled walls guarantee excellent stability when walking through the armature. Additionally, the hole allows the wire to be attached to the rod.

Fiber-reinforced concrete BD 20/25/30 width 20 mm; Fiber-reinforced concrete BD 35/40/50 width 25 mm

packaging: 1000 pcs (BD 20/25/30); 250 pcs (BD 35/40/50)

Corner strips plain and with collar. Embedding in formwork is used to form "torn" edges. Length 250 cm

Chamfer strip 11, 15, 20, 25, 30

Chamfer strip-N 11, 15, 20, 25, 30

packaging: 100 pcs (A = 11, 15, 20, 25); 50 pcs (A = 30)

"Lost" formwork to form a channel to prevent rainwater from running down the sides of the structures exposed to the weather.

Waves strips 15, 20; length 250 cm

packaging: 100 m

The 60cm strip of spacing is provided with locks for connecting one another at the ends. It is suitable for horizontal heavy or overhang reinforcement, after being divided into several parts of the required length, it can also be used across the reinforcement in the bar elements. It is manufactured at a height of 30 to 55 mm with a 5 mm gradient. The lens-ending of the contact pins provides a point contact with the formwork.

Hedgehog 30, 35, 40, 45, 50, 55

packaging: 160 pcs (30, 35); 120 pcs (40, 45); 100 pcs (50, 55)

Universal body for vertical and horizontal reinforcement up to a diameter of 14 mm steel. Ideally suited for heavier fittings and walkways. It is manufactured at 10 to 55 mm in height at 5 mm. The body diameter is 6 cm. The lens-ending of the contact pins provides a point contact with the formwork.

Mates 10, 15, 20, 25, 30, 35, 40, 45, 50, 55;

packaging: 500 pcs

Body with dimensions 210 x 3 mm at 15, 20, 25, 30, 35, 40 or 50 mm. It has a large eyelet to hang on reinforcement with diameter up to 18 mm. Excellent price, lenticidal pins ends.

Parafix vertical

Body on vertical reinforcement with dimensions 21 x 6 mm, but with two locks 15 cm apart. Suitable for meshes up to the diameter 12 mm. Cover height such as Parafix, excellent price relations, lenticular pins ands.

Extension rod end for clean ending. Used in combination with a seal.

Plug-in cone

internal diameter 22 mm; cone high 10 mm

packaging: 1000 pcs

The Praxifix bodies are especially suitable for horizontally laid reinforcements with a higher cover height, especially the mesh, up to 30 cm with a steel diameter of up to 32 mm. The elements of the various heights can be combined - set up inside the basic "K" series, which is particularly advantageous when fixing the top reinforcement.

For use on soft substrates - insulating boards, etc. - a dispensing disc is provided for both rows, where the "legs" of the body are inserted.

The basic "S" series and the more robust "K" series have legs finished off lens to provide a point-of-form touch. In the basic row, you can also order bodies that have their legs on the shoulder with their entire cross-section, by way of a variation of the letter S.

Basic S 15, 20, 25, 30, 35, 40, 50, 60, 70, 75, 80, 90, 100,

Strong K 50, 65, 75, 80, 90, 100, 115, 125, 140, 150

U-shaped pressed bar with a length of 35 cm. The location of the "zigzag" slots also allows the use of a flat face down on soft insulating materials where the fitting member touches a single "tooth". Very nice price.

Sonderfix 20 (width 30 mm), 25 (width 40 mm), 30 (width 50 mm)

packaging: 200 pcs

Practical spacer under a horizontally mounted reinforcement especially a net. It is produced in cover heights of 15, 20, 25 and 30 mm. A circle of twelve rings can cover up to 10 m² of area with very good price. The diameter of the largest circle is 42 cm, the smallest 15 cm. The chopping end of the studs provides a point contact with the formwork.

packaging: 25pcs (15, 20); 20 pcs (25,30)

Extension rod end for clean ending. Used in combination with a seal.

Sperrfix-cap 2 (for tubes 22 mm / 26 mm)

packaging: 100 pcs

The tubular spacer into the system formwork serves as an anchor rod guard.

Tubular spacer 22/26 (diameter internal/external), length: 200 mm

packaging: 100 pcs

A body of traditional shape for use on a vertical and intact lightweight horizontal reinforcement. A universal lock for the most used steel types reduces the range of supplies.

Ultrafix 15 for diameter 4-10 mm, Ultrafix 20, 25, 30, 40, 50 for diameter 5-16 mm

packaging: 1000 pcs (15, 20, 25); 500 pcs (30, 40); 250 pcs (50)